I accidentally dropped the impulse casting of the Enterprise NCC-1701-A model.
Since the piece was made from extreeeeeeeeeeeeeeeemly brittle resin, it broke into about 30 pieces that could not even be glued back together with superglue!

A replacement part would have cost $70 plus shipping, so I decided to built a new (and stronger) part from scratch:
Enterprise impulse
From the original part I only used the clear dome part. The impulse ingines were later rebuilt from acrylics and black masking tape.

I have now heard of 6 or 7 model builders with broken impulse drive castings.
Unfortunately, I did not make a mold of the scratch built impulse drive piece and cannot offer any castings.

back to the previous page original movie props, wardrobe and replica movieprops

Copyright © by Ketzer.com: original movie props and costumes. sitemap