This is the aluminum tube the Enterprise NCC-1701-A model gets mounted onto.
The thinner part of the tube completely disappears inside the ship.
At the top of the tube, there is a regular 3.5mm head phone connector, supplying the 12V the model runs on.


The bottom of the Enterprise NCC-1701-A model with the hole for the mounting rod.
Inside that hole, about 3 inches into the ship, there is a regular head phone plug.
If the model is put onto its stand, the plug clicks into the top of the tube and the model lights up. So no cables are visible when the ship is removed from its stand.

back to the previous page original movie props, wardrobe and replica movieprops

Copyright © by Ketzer.com: original movie props and costumes. sitemap